Brother MFC-J835DW Manuel d'installation rapide - Page 24

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother MFC-J835DW. Brother MFC-J835DW 45 pages. Quick setup guide - spanish
Également pour Brother MFC-J835DW : Manuel (12 pages), Manuel (21 pages), Manuel de sécurité des produits (17 pages), Manuel Web Connect (22 pages), Manuel de sécurité (17 pages), Manuel de dépannage (6 pages), (espagnol) Manuel (21 pages), (espagnol) Manuel (16 pages), (anglais) Quick Configuration Guide (44 pages)

Wired Network

For wired network interface users

Before you install

Make sure your machine is connected to the power

and your Macintosh is ON. You must be logged on

with Administrator rights.

Note

• For Mac OS X 10.4.0 to 10.4.10 users, upgrade

to Mac OS X 10.4.11 - 10.6.x.

• If you have previously set up your machine for

a wireless network and then want to set it up on

a wired network, you should check that the

machine's Network I/F is set to

Wired LAN. The wireless network interface

will become inactive with this setting.

On your machine, press Menu.

Press Network.

Press a or b to display Network I/F.

Press Network I/F.

Press Wired LAN.

Press Stop/Exit.

(Mac OS X 10.4.11, 10.5.x, 10.6.x)

Connect the network

cable

Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

You will find the LAN socket marked with a

symbol inside the machine on the left as shown

below. Remove the protective cap and connect

the network cable to the LAN socket.

Macintosh

USB