AEG 67600KF Manuel d'installation et d'utilisation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AEG 67600KF. AEG 67600KF 40 pages. Ceramic glass induction hob

Imprimer la page

Note:

Please note the diameter of the pan base when buying new pans,

since the manufacturers usually specify the top edge diameter of their

pans.

Automatic Pan Sensing

The induction cooking zone does not function when unsuitable pans

are used.

If the cooking zone is switched on without a suitable pan on it f

flashes in the digital display of the cooking zone.

After about 10 minutes the cooking zone switches itself off automati-

cally. _ appears in the digital display.

Also when overheating occurs (e.g. heating up a pan that is empty) or

with faults in the electronics the display _ is lit. The cooking zone

switches itself off automatically.

To be able to use it again the cooking zone must have been first

switched off and then reset to the required heat setting.

Pots and pans for rapid-glowing standard cooking zones

• On principle all pots and pans with level bases are suitable for radiant

heat cooking zones. You can recognise good quality pans by the base

of the pan, and not from the material from which the pan is made.

• The base should be as thick and flat as possible. Rough bases (e.g. cast

iron pots) scratch the hob surfaces when they are slid about.

• Pots with aluminium or copper bases can cause metallic discolouring

on the ceramic glass surface, which is very difficult or impossible to

remove.

• The saucepan base and cooking zone should be the same size.

Attention! Avoid letting enamel saucepans and frying pans boil dry.

The base could be damaged and then scratch the cooking surface when

slid. Saucepans and frying pans with sharp edges and burrs will also

scratch.