AEG 67600KF Manuel d'installation et d'utilisation - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AEG 67600KF. AEG 67600KF 40 pages. Ceramic glass induction hob

Imprimer la page

Heat Setting Selection

For setting and adjusting the heat setting (1 to 9) for the selected

cooking zone.

Use sensor field + to increase the heat setting.

Lower the heat setting with sensor field -.

If several cooking zones are being used simultaneously, the required

cooking zone must be selected by touching the appropriate sensor field

before adjusting the heat setting. The decimal point in the display

shows which cooking zone has been selected.

Activating the power function

In order to switch on the power function (front left cooking zone on-

ly), the cooking zone must be selected (decimal point in the display).

Touch the "Power function" sensor field. p appears in the display and

the power function has now been activated.

The power function will be activated for a maximum of 10 minutes.

Following this the cooking zone will automatically switch to heat level

The power function can be switched off in the following way:

• Touching the "Power function" sensor field.

• Touching the sensor field -.

While the power function of the front left cooking zone is active, the

front right induction cooking zone can be operated at a maximum heat

setting of 7.

If a higher setting than 7 (e.g., 8, 9 or A) is set for the front right cook-

ing zone, the heat setting display will alternately show the heat setting

selected and 7. As soon as the power function has ended (max. 10 min-

utes), the front right cooking zone will change automatically to the

previously set heat setting.