Brother DCP-7060D Manuel de l'utilisateur avancé - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur avancé pour {nom_de_la_catégorie} Brother DCP-7060D. Brother DCP-7060D 24 pages. Printers
Également pour Brother DCP-7060D : Manuel de l'utilisateur avancé (33 pages), Manuel d'installation rapide (20 pages), Manuel d'installation rapide (20 pages), Manuel d'installation rapide (15 pages), Manuel d'utilisation de base (5 pages)
Imprimer la page
Checking the remaining life of
the drum unit
You can see the machine's parts life on the
LCD.
a
Press Menu.
b
Press a or b to choose one of the
following:
3.Machine Info.
(DCP-7055/DCP-7057/DCP-7060D)
4.Machine Info.
(DCP-7055W/DCP-7057W/
DCP-7065DN)
5.Machine Info. (DCP-7070DW)
Press OK.
c
Press a or b to choose one of the
following:
4.Drum Life
(DCP-7055/DCP-7057/DCP-7060D)
5.Drum Life (DCP-7065DN)
6.Drum Life
(DCP-7055W/DCP-7057W/
DCP-7070DW)
Press OK.
d
Press Stop/Exit.
Note
The life check will be accurate only if you
have reset the part counter when you
installed a new part. It will not be accurate
if that part's life counter was reset during
the life of the used part.
16
Packing and shipping
the machine
A
Note
• If for any reason you must ship your
machine, carefully repack the machine in
the original packaging to avoid any
damage during transit. The machine
should be adequately insured with the
carrier.
• If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts, including the drum unit, the toner
cartridges, and printed materials to use
with your 'replacement' machine.
a
Turn off the machine's power switch.
Disconnect all the cables, and then
unplug the power cord from the AC
power outlet. Leave the machine turned
off for at least 10 minutes to cool down.
b
Open the front cover.
c
Remove the drum unit and toner
cartridge assembly. Leave the toner
cartridge installed in the drum unit.
A