Brother DCP-B7640DW Manuel de sécurité des produits - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de sécurité des produits pour {nom_de_la_catégorie} Brother DCP-B7640DW. Brother DCP-B7640DW 22 pages.
Également pour Brother DCP-B7640DW : Manuel de sécurité des produits (19 pages), Manuel de sécurité des produits (22 pages), Manuel d'installation rapide (2 pages), Manuel de sécurité des produits (19 pages)

Avoid placing your product in a busy area. If you must place it in a busy area, ensure that the

product is in a safe location where it cannot be accidentally knocked over, which could cause

injury to you or others and serious damage to the product.

Ensure that cables and cords leading to the product are secured so as not to pose a tripping

hazard.

DO NOT place heavy objects on the product.

DO NOT place any objects around the product. Such objects block the access to the power

outlet in case of emergency. It is important that the product can be unplugged whenever

needed.

The product may generate odorous gas such as ozone if used for a large volume of printing or

used in a poorly ventilated room for multiple hours. In addition, the product emits some

chemical substances during the printing process. Ensure adequate ventilation for the product

to avoid injury or discomfort.

IMPORTANT

• DO NOT place your product next to devices that contain magnets or generate magnetic

fields. Doing so may interfere with the operation of the product, causing print quality

problems.

• DO NOT place your product next to sources of interference, such as speakers or the base

units of cordless telephones. Doing so may interfere with the operation of the product's

electronic components.

Connect the Product Safely

WARNING

ELECTRICAL HAZARDS

Failure to follow the warnings in this section may create the risk of an electrical shock. In

addition, you could cause a short circuit, which may create the risk of fire.