Brother DCP-J100 Manuel de démarrage rapide - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Brother DCP-J100. Brother DCP-J100 25 pages. Color multi-function printer
Également pour Brother DCP-J100 : Manuel de l'utilisateur avancé (44 pages), Manuel de l'utilisateur (48 pages), Manuel de sécurité des produits (18 pages)
Imprimer la page
f
Gently adjust the paper width guides to the
paper with both hands. Make sure that the
paper width guides touch the edges of the
paper.
g
Close the output paper tray cover.
h
Slowly push the paper tray completely into the
machine.
i
While holding the paper tray in place, pull out
the paper support until it clicks, and then unfold
the paper support flap.
7
Check the print quality
a
When the preparation process has finished, the
LCD shows this message
Set Paper and
q
Press Start
Press Colour Start.
b
Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press a (Yes) to
finish the quality check and go to the next step.
If lines are missing, press b (No) and follow the
steps on the LCD.
8
Set the date and time
Setting the date and time allows the machine to clean
the print head regularly and maintain optimum print
quality.
a
When the LCD shows this message, press OK.
Date&Time
q
Enter & OK Key
b
Press a or b to enter the last two digits of the
year, and then press OK.
c
Repeat for the Month and Day, and then Hours
and Minutes in 24-hour format.
NOTE
You can change the date and time if needed. For
more information uuBasic User's Guide: Setting
the date and time
5