Brother DCP-J140W Manuel de sécurité des produits - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de sécurité des produits pour {nom_de_la_catégorie} Brother DCP-J140W. Brother DCP-J140W 16 pages. Advanced users manual spainish - english and spanish
Également pour Brother DCP-J140W : Manuel d'installation rapide (33 pages), Manuel de l'utilisateur avancé (22 pages), Manuel de démarrage rapide (21 pages), Manuel de l'utilisateur avancé (21 pages), (anglais) Quick Configuration Guide (32 pages), (Guide de l'utilisateur avancé (23 pages)

DO NOT place the machine near chemicals or in a place where chemicals could be spilled on

it. Should chemicals come into contact with the machine, there may be a risk of fire or electric

shock. In particular, organic solvents or liquids such as benzene, paint thinner, polish remover,

or deodorizer may melt or dissolve the plastic cover and/or cables, resulting in a risk of fire or

electric shock. These or other chemicals may also cause the machine to malfunction or become

discolored.

DO NOT put the machine in a location where any slot or opening in the machine is obstructed

or blocked. These slots and openings are provided for ventilation. Blocking the machine's

ventilation could create a risk of overheating and/or fire. Instead:

• Place the machine on a solid surface, never on a bed, sofa, rug, or other similar soft surface.

• Do not place this machine in a "built-in" installation unless adequate ventilation is provided.

Plastic bags are used in the packing of your machine. Plastic bags are not toys. To avoid the

danger of suffocation, keep these bags away from babies and children and dispose of them

correctly.

CAUTION

Avoid placing your machine in a high-traffic area. If you must place it in a high-traffic area,

ensure that the machine is in a safe location where it cannot be accidentally knocked-over,

which could cause injury to you and serious damage to the machine.

Ensure that cables and cords leading to the machine are secured so as not to pose a tripping

hazard.

DO NOT place this machine on an unstable or tilted cart, stand, table or on any tilted/slanted

surface. The machine is heavy and may fall, causing injury to you and serious damage to the

machine.