Brother DCP-J572DW Manuel de référence - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel de référence pour {nom_de_la_catégorie} Brother DCP-J572DW. Brother DCP-J572DW 34 pages. Brief explanations for routine operations
Également pour Brother DCP-J572DW : Manuel d'installation rapide (2 pages), Manuel d'installation rapide (2 pages), Manuel de référence (32 pages), Manuel (19 pages), Manuel d'installation rapide (2 pages), Manuel de sécurité des produits (21 pages)

Imprimer la page
Brother DCP-J572DW Manuel de référence

Choose the Correct Receive Mode

Related Models:
MFC-J491DW
You must choose a Receive Mode depending on the external devices and telephone services
you have on your line.
By default, your machine automatically will receive any faxes that are sent to it. The diagram
below will help you select the correct mode.
Do you want to use the telephone features of your machine (if available) or
an external telephone or external telephone answering device connected on the
same line as the machine?
Yes
Are you using the voice message function of
an external telephone answering device?
Do you want the machine to answer fax and
telephone calls automatically?
1
Press Settings.
2
Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Setup Receive]. Press OK.
c. Select [Receive Mode]. Press OK.
(For some countries)
If you cannot change the [Receive Mode] option, make sure the Distinctive Ring feature is
set to [Off].
(For New Zealand)
If you cannot change the [Receive Mode] option, make sure the FaxAbility feature is set
to [Off].
3
Press a or b to select the [Fax Only], [Fax/Tel], [External TAD], or [Manual]
option, and then press OK.
No
No
Fax Only
Manual
No
Fax/Tel
Yes
External TAD
Yes
17