Brother DCP-T220 Manuel de démarrage rapide

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Brother DCP-T220. Brother DCP-T220 4 pages.
Également pour Brother DCP-T220 : Manuel d'installation rapide (4 pages), Manuel d'installation rapide (4 pages), Manuel d'installation rapide (4 pages), Manuel d'installation rapide (4 pages), Manuel d'installation rapide (4 pages), Manuel de l'utilisateur (23 pages), Manuel d'installation rapide (4 pages), Manuel de sécurité des produits (18 pages)

DCP-T220 / DCP-T420W

DCP-T425W / DCP-T428W

Unpack the machine and check the components

Inbox Ink Bottles*4

Fill the ink tanks with inbox ink

BTD60BK

BT5009CMY

IMPORTANT

Check the ink bottle model name on the

label. Using the incorrect ink may cause

damage to the machine.

Remove the nozzle cap and insert the bottle nozzle firmly into the ink tank so

that the ink does not spill.

The bottle is self-standing and the ink fills automatically until the bottle is empty.

To fill the ink tank faster, squeeze the bottle on both sides.

Load plain A4 paper in the paper tray

Quick Setup Guide

Read the Product Safety Guide first, then read this guide for the correct installation procedure.

Keep this guide next to your machine for quick reference.

You must follow steps

Open the ink tank cover a, remove the cap

b, and place it on the back of the cover c.

to complete the setup.

Remove the protective tape and the film covering the machine.

NOTE

• Save all packing materials and the box in case you must ship your

machine.

• We recommend using a USB 2.0 cable (Type A/B) that is no more than

2 meters long.

Operation Videos

www.95105369.com

Remove the film and tighten the cap firmly.

When finished, remove the bottle,

pointing the nozzle upward so the ink

does not spill.

Fan the paper well.

CHN-ENG

Version 0

Installation

& Using

Videos

Replace the ink tank cap. Repeat

step

for the other ink tanks, and

then close the ink tank cover.