Brother DCP-T300 Manuel de démarrage rapide - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Brother DCP-T300. Brother DCP-T300 25 pages.
Également pour Brother DCP-T300 : Manuel de l'utilisateur avancé (39 pages), Manuel de l'utilisateur avancé (40 pages), Manuel de l'utilisateur avancé (46 pages)

For Wireless Network Users

For wireless network interface users (DCP-T500W/T700W)

NOTE

If you have previously configured the wireless settings of the machine, you must reset the network settings

before you can configure the wireless settings again.

On your machine, press Menu.

Press a or b to choose 3.Network. Press OK.

Press a or b to choose 0.Network Reset. Press OK.

Press a twice to accept the change.

NOTE

To set up your machine in Ad-hoc mode (connected to a wireless-capable computer without an access

point/router), see instructions in the Software and Network User's Guide.

To download the Software and Network User's Guide, visit at http://solutions.brother.com/manuals and go to

your model's Manual page.

Choose your wireless setup method

The following instructions will offer three methods for setting up your Brother machine on a wireless network. If

you began the wireless setup from step 9 on page 6, go to method b or c. For all other users, choose the method

you prefer for your environment.

Method a is the recommended way to connect (Windows

Setup using the CD-ROM (Windows

• We recommend using a computer wirelessly connected to your network for this method.

• A USB cable might be needed in some cases.

Now go to

or Macintosh).

and Macintosh)

page 15