Brother GTX Series Manuel de référence - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de référence pour {nom_de_la_catégorie} Brother GTX Series. Brother GTX Series 13 pages.
Également pour Brother GTX Series : Manuel de référence (13 pages)

Imprimer la page

ADDITIONAL WEEKLY MAINTENANCE

Visual inspection is important to keep your printer up and run-

ning. Verify all the moving parts of the machine and also check

for leakage of ink.

Please follow also all the instructions that could appear on the

display of the printer!

When you see a yellow number push the

you have to perform to erase the Error/Warning message

INTERNAL CLEANING OF PRINTER

> If the inside of your printer is covered with ink mist, perform a cleaning!

> Always use this menu to perform cleanings or replace parts :

Maintenance

CLEAN

Maintenance Part Clean/Replace

Remove 3 Screws to remove the Encoder Cover.

With the Clean Stick R dipped in Cleaning Solution,

wipe away the stains on the 3 Carriage Rollers.

Move the carriage from side to side to wipe all around

the 3 rollers completelly.

Clean the Carriage Guide Shaft and the 3 sides [upper,

front, and lower] of Roller Guide with a non-fuzzy cloth

moisten with a small amount of isopropyl alcohol [95°]

Do not use alcohol on other parts than the carriage

guide shaft and the roller guide!

Apply a proper amount of Molykote 30 Grease onto the

Carriage Guide Shaft only [never on the Roller Guide!]

Remove 3 screws to take out the encoder metal cover.

With your non-fuzzy cloth moisten with alcohol, clean

carefully both side of the Encoder Strip

Perform a CR Speed Adjustment.

Menu > Printer Setting > CR Speed Adjustment > OK

Print out a Nozzle Check pattern.

GREASE

key to know what

and follow instructions on the display