Brother GTX600NB Manuel de configuration - Page 26

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Brother GTX600NB. Brother GTX600NB 45 pages. Garment pra inter
Également pour Brother GTX600NB : Manuel de sécurité (2 pages)

Imprimer la page
Setup of the printer
Connect the humidifier water supply tube.
1.
Loosen the two screws on the lower left-hand-side cover on the
right-hand side of the printer.
2.
Remove the two screws and remove the cover.
17
3.
Insert the humidifier water supply tube into the outlet marked
WATER.
NOTE
Make sure to insert it to the end.
Connectible tubes are those with an outer
diameter of 4 mm or 1/4 inch.
TIPS
Install the removed cover, tighten the screws, and mount the
cap.
Be careful not to pinch the tubes.
IMPORTANT
*Remove this tube in the case
of using a tube with a connection
diameter of 4 mm.