AEG C67600K Manuel d'installation et d'utilisation - Page 33

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AEG C67600K. AEG C67600K 44 pages. Ceramic glass induction hob
Également pour AEG C67600K : Manuel d'installation et d'utilisation (46 pages), Manuel d'installation et d'utilisation (47 pages)

Imprimer la page
AEG C67600K Manuel d'installation et d'utilisation
... the residual heat indicator suddenly fails to operate except for
_ or h.
Check whether
– the "On/Off" switch was activated by mistake.
– the sensor fields may be partially covered by a damp cloth, liquid or
similar.
– the safety shut-down was activated.
... the letter _ or h is still displayed by the residual heat indicator
after switching off the cooking zones.
Check whether
– the cooking zone has only been on for a short time and is therefore
not yet hot enough.
If the cooking zone is hot, please ring customer service.
... a cooking zone cannot be switched off
Check whether
– the sensor switches may be partially covered by a damp cloth or by
liquid.
– the lock mechanism is switched on.
... a cooking zone cannot be switched on
Check whether
– the lock mechanism is switched on.
... the indicator f is flashing
Check whether
– the pan is located on the correct cooking zone,
– the diameter of the pan base is too small for the cooking zone,
– the pan is suitable for induction.
... _ appears on the display
Check whether
– the cooking zone has overheated.
switch off the appropriate cooking zone and let it cool down. Try
switching on the cooking zone again using a suitable pan after a few
minutes.
– the automatic switch-down for the cooking zone has triggered.
You can reactivate the cooking zone by switching it off and on brief-
ly.
... the power function cannot be switched on
– Switch off the cooking zone for approx. 10 minutes.
If this fault occurs repeatedly check whether
– the requisite ventilation area between the work surface and the unit
facing underneath it has been covered over.
– the requisite ventilation area (25 cm
ance was installed (see chapter "Installation").
2
) was observed when the appli-
73