Brother HL-1040 Manuel d'installation rapide - Page 30

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother HL-1040. Brother HL-1040 42 pages. Brother hl-1040: quick setup
Également pour Brother HL-1040 : Liste de référence des pièces (16 pages)

Imprimer la page

High Temperature

Warning

After you have just used the printer,

some internal parts of the printer are

extremely hot. When you open the top

cover of the printer, never touch the

shaded parts shown in the following

illustration.

Remove the toner cartridge from the drum

unit and keep it in a safe place.

Note

Discard the used drum unit according to local

regulations. If you are not sure of them, consult

your local dealer/retailer. Be sure to seal up the

drum unit tightly so that toner powder does not

spill out of the unit. Do not discard used drum

units together with domestic rubbish.

It is recommended to put the drum unit on a

piece of disposable paper or cloth in case of

accidental toner spill or scatter.

Unpack the drum unit and gently shake it

five or six times horizontally.

Caution

Only unpack a drum unit immediately

before installing it into the printer. If an

unpacked drum unit is subjected to

excessive direct sunlight or room light,

the unit may be damaged.

Handle the toner cartridge and the drum

unit carefully as it contains toner. If

toner scatters and your hands or clothes

get dirty, wipe or wash it off with cold

water immediately.

Caution

Do not remove the starter sheet.

- 28 -