Brother HL-1040 Manuel d'installation rapide - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother HL-1040. Brother HL-1040 42 pages. Brother hl-1040: quick setup
Également pour Brother HL-1040 : Liste de référence des pièces (16 pages)

Imprimer la page

Action 5-1: Connect Your Printer to Your Computers parallel

interface

You must connect the printer to your computer with a suitable interface cable. In most cases, a

bi-directional IEEE 1284 compliant parallel cable is used for this connection.

NOTE

The HL-1040/1050 printer can also operate with an RS-232C/RS-422A serial interface by

installing the optional serial interface board. In some countries it might be pre-installed.

more information, see "CHAPTER 4 OPTIONS" in the On-line User's Guide.

For the location of your computers parallel (or serial, if you are using the optional interface

board) printer port, refer to the User's Guide of your computer.

Make sure that the printer power switch is

off before connecting or disconnecting the

interface cable.

Also, make sure that the computer is turned

off.

Connect the parallel interface cable to the

parallel interface port of the printer. (

Secure the connection with the wire clips.

(

)

Connect the interface cable to the printer

port of the computer.

- 7 -

)

For