AEG CCE84543FB Manuel de l'utilisateur - Page 26

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG CCE84543FB. AEG CCE84543FB 28 pages.

Imprimer la page

Fluid Dynamic Efficiency class

Lighting Efficiency - LEhood

Lighting Efficiency Class

Grease Filtering Efficiency - GFEhood

Grease Filtering Efficiency class

Minimum Air Flow in normal use

Maximum Air Flow in normal use

Air Flow at intensive/boost setting

A-weighted Sound Power Emissions at minimum speed

A-weighted Sound Power Emissions at maximum speed

A-weighted Sound Power Emissions at intensive or boost speed

Measured power consumption off mode - Po

Measured power consumption in standby mode - Ps

Additional Information

Time increase factor - f

Energy Efficiency Index - EEIhood

Measured air flow rate at best efficiency point - QBEP

Measured air pressure at best efficiency point - PBEP

Maximum air flow - Qmax

Measured electric power input at best efficiency point - WBEP

Nominal power of the lighting system - WL

Average illumination of the lighting system on the cooking surface - Emiddle

Appliance tested according to: IEC / EN

61591, BS EN 61591, IEC / EN 60704-1, BS

EN 60704-1, IEC / EN 60704-2-13, BS EN

60704-2-13, IEC / EN 50564, BS EN 50564.

The data in the table above refers to the

appliances in exhaust mode. The appliances

in recirculation mode can be transformed into

exhaust mode by following the installation

instructions provided in the installation

booklet, and by using a dedicated filter

available in our official stores. For more

information visit our website.

12.4 Hood - Energy saving

You can save energy during everyday

cooking if you follow the hints below.

ENGLISH

85.1

260.0

500.0

630.0

0.49

0.8

42.0

268.5

469

630.0

105.8

• When you start cooking, set the hood fan

at a low speed level. Once the cooking is

finished, keep the hood running for a few

minutes.

• Increase the fan speed only to get rid of

large amounts of steam or smoke. It is

recommended to use the Boost function

only in extreme situations.

• Clean the hood filter regularly and replace

it when necessary to maintain its

efficiency.

• Use the maximum diameter of the ducting

system to optimize efficiency and minimize

noise.

lux/W

m3/h

db(A) re 1 pW

m3/h

lux