LG 19MB35P Manuel du propriétaire - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} LG 19MB35P. LG 19MB35P 29 pages. Ips led monitor
Également pour LG 19MB35P : Manuel du propriétaire (30 pages), Manuel du propriétaire (29 pages), Manuel du propriétaire (29 pages), Manuel du propriétaire (29 pages), Manuel du propriétaire (29 pages), Manuel du propriétaire (30 pages), Manuel du propriétaire (28 pages), Manuel du propriétaire (29 pages)

Imprimer la page
LG 19MB35P Manuel du propriétaire
8
ASSEMBLING AND PREPARING

Adjusting the stand height

1
Place the monitor mounted on the stand base
in an upright position.
2
Remove the tape attached at the bottom rear
of the stand body, then pull out the locking
pin.
Stand Body
3
The height can be adjusted up to 110 mm(4.33
inches).
CAUTION
Once the pin is removed, it is not necessary
y
to re-insert it to adjust the height.
WARNING
Do not put your finger be-
y
tween the screen and the
base (chassis) when adjust-
ing the screen's height.
Tape
Locking Pin
110 mm(4.33 inches)
Using the Kensington locking
device
The connector for the Kensington lock is located
on the rear of the monitor.
For more information on installation and usage,
refer to the Kensington lock user manual or visit
the website at http://www.kensington.com.
Connect the monitor to the table with the Kensing-
ton lock cable.
NOTE
Using the Kensington lock is optional. The
y
accessories can be purchased at your local
electronics store.