AEG 61300 Manuel d'instruction - Page 40

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} AEG 61300. AEG 61300 48 pages. Washing machine
Également pour AEG 61300 : Manuel d'instruction (48 pages)

Imprimer la page

Installation and Connection Instructions

Installation-Site Preparation

The installation surface must be clean, dry and level.

Do not install on deep pile carpet.

If the appliance is installed next to heat source (e. g. cooking appli-

ance), a heat insulating pad (85 x 57 cm) must be placed between the

washing machine and the heat source.

Do not install the appliance in locations where the temperature may

fall below freezing.

Please ensure that when the appliance is installed it is easily accessi-

ble for the engineer in the event of a breakdown.

Installation on a Suspended Floor

Suspended wooden floors are particularly susceptible to vibration. To

help prevent vibration we recommend you place a waterproof wood

panel, at least 15 mm thick under the appliance, secured to at least 2

floor beams with screws. If possible install the appliance in one of the

corners of the room, where the floor is more stable.

Levelling the Appliance

Using the four adjustable threaded feet, compensation can be made for

unevenness in the floor and the height of the appliance adjusted. The

height can be adjusted over the range +10... -5 mm.

To adjust the feet use the special spanner supplied for removing the

transport braces.

1. Slide the special key firmly onto the hexagon head of the threaded foot

all the way to the stop.

2. Adjust the threaded feet so that the appliance is level and stable. The

appliance must not rock across the corners when operating under load.

3. If necessary, check positioning with a spirit level.

Important! Never use strips or shims of wood or cardboard etc. to

compensate for any uneveness in the floor. Always use the adjustable

feet.