Brother RuggedJet RJ-4040 Manuel de référence rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de référence rapide pour {nom_de_la_catégorie} Brother RuggedJet RJ-4040. Brother RuggedJet RJ-4040 2 pages. Multi-protocol on-board ethernet print server and wireless ethernet print server
Également pour Brother RuggedJet RJ-4040 : Manuel de l'utilisateur (33 pages), Manuel du logiciel (48 pages), Manuel de référence rapide (1 pages), Manuel de l'utilisateur (34 pages), Manuel de sécurité des produits (22 pages)
Imprimer la page
Indicators
= Indicator is lit
G = Green
= Indicator is blinking
O = Orange
Indicator blinks 1 or 2 times in each colour,
=
R = Red
then turns off
B = Blue
= Indicator is lit or blinking in any colour or pattern
(off) = Indicator is off
Example: G
= Indicator is blinking in green
BATT
(Bluetooth)
POWER
STATUS
Description
(BATTERY)
(Wi-Fi)
G
Power on
O
Roll cover open
Receiving data
G
Transferring data
Error
Print error
Feed error
Cover open error
Communication error
G
R
Image processing error
Database search error
No template error
Access point search error
Access point connection error
Security error
Error
R
R
(off)
Battery error
Mass storage error
R
R
R
(off)
System error
(off)
(off)
(off)
R
In boot mode
Troubleshooting
The printer does not print, or there is a printing error.
Is the cable loose?
Check that the cable is connected securely.
Is the RD Roll installed correctly?
If not, remove the RD Roll and reinstall.
Is there enough roll remaining?
If not, install a new RD Roll.
Is the RD Roll compartment cover open?
Check that the RD Roll compartment cover is closed.
Has a print error or transmission error occurred?
Turn off the printer and on again. If the problem still occurs, contact your Brother dealer.
Is the roll guide not touching the side of the RD Roll?
Move the roll guide against the side of the RD Roll.
The POWER indicator is not lit.
Is the power cord inserted correctly?
Check that the power cord is inserted correctly. If it is, try plugging it into another electrical
socket.
If the POWER indicator still does not light up, contact your Brother dealer.
Printed labels contain streaks or poor quality characters, or labels are not fed correctly.
Is the print head or roller dirty?
Although the print head generally remains clean under normal use, lint or dirt from the roller may
become stuck on the printer head. If this occurs, clean the roller.
A data transmission error appears on your computer.
Is the correct port selected?
Check that the correct port is selected.
Is the printer in cooling mode (the POWER indicator is flashing in orange)?
Wait until the indicator stops flashing and then try printing again.
Is someone printing via the network?
If you try to print while other users are printing large amounts of data, the printer is unable to
accept your print job until the ongoing printing is finished. In such situations, execute the print
job again after the other jobs are completed.
Labels are jammed or are not ejected correctly after printing.
Is there dirt or lint on the roller preventing it from rolling freely?
Check that the ejection path of the label is not blocked.
Check that the RD Roll is set correctly by removing the RD Roll and reinstalling.
Ensure that the RD Roll compartment cover is closed correctly.
BATT
(Bluetooth)
POWER
STATUS
Description
(BATTERY)
(Wi-Fi)
B
Wireless on, not connected*
(Once every
3 seconds)
B
Wireless or Bluetooth on, connected
B
Now setting WPS*
(Once every
second)
(off)
O
O
O
Now resetting
Formatting complete (When [Print
O
O
O
Data after being Printed] is set to
[Erase])
O
Now cooling
O
MCR read mode
O
G
(off)
MCR read success
O
R
(off)
MCR read error
O
Rechargeable battery power: half
(Once every
4 seconds)
O
Rechargeable battery power: low
(Twice every
4 seconds)
O
Battery must be charged
(Once every
second)
O
Charging
Rechargeable battery power: full
(off)
Charging complete
G
G
(off)
In mass storage mode
G
G
B
Processing file in mass storage mode
(off)
(off)
G
R
Initialising
*RJ‑4040 only
The print quality is poor.
Is there dirt or lint on the roller preventing it from rolling freely?
Clean the roller.
Printed barcodes cannot be read.
Align the label with the print head as shown below.
1
3
2
1
Label exit slot
2
Print head
3
Recommended print direction
Some types of scanners are not able to read the barcodes. Try using another scanner.
We recommend setting [
Quality] in the printer properties window to [Give priority to print
quality] when printing barcodes.
I want to reset the printer/delete the data transferred from the computer.
To reset the printer, perform the following procedure;
1
Press and hold the
(Power) button to turn the printer off.
2
Press and hold the
(Feed) button and the
(Power) button until the POWER, STATUS
and BATTERY indicators start blinking in orange.
3
While pressing the
(Power) button, press the
(Feed) button 3 times.
4
Release the
(Power) button and the
(Feed) button at the same time.
All the transferred data from the computer will be deleted and reset the printer to factory settings.
I want to cancel the current print job.
Make sure that the printer is ON, and press the
(Power) button.
Maintaining the Printer
Maintenance of the printer may be carried out as required. However,
some environments require that maintenance must be done more
frequently (e.g. in dusty conditions).
Print Head Maintenance
Use a cotton swab and wipe the head.
1
1
Print head
Roller Maintenance
Use a piece of cellophane tape to remove dirt from the roller.
2
2
Roller
When printing via the USB cable, the printer repeatedly pauses and then continues
printing.
Is the printer set for sequential printing?
If so, set print mode to buffered printing.
For Windows
XP:
®
Open the printer properties from [Control Panel] ‑ [Printers and Other Hardware] ‑ [Printers
and Faxes] and click [Printing Preference] button in the [General] tab. Click the [Other] tab and
choose the option [After one page of data is received].
For Windows Vista
:
®
Open printer properties from [Control Panel] ‑ [Hardware and Sound] ‑ [Printers] and click
[Printing Preference] button in the [General] tab. Click the [Other] tab and choose the option
[After one page of data is received].)
For Windows
®
7:
Open printer properties from [Devices and Printers], right‑clicking the printer whose settings are
to be changed, and selecting [Printing Preference]. Choose the option [After one page of data
is received].
An error occurs when the roll cannot be fed to the beginning of the label.
If a feed error occurs, use the Custom Label Tool to assign the correct paper settings to the printer.
The computer program should be sending data to the printer, but the POWER indicator
does not blink green.
Make sure that the USB cable is connected firmly and correctly. Try using another USB cable.
Depending on whether you are using Bluetooth or Wi-Fi, confirm that the
(Bluetooth) indicator
or the
(Wi‑Fi) indicator is lit in blue. If it is not, check the connection.
Paper Outlet Maintenance
If glue accumulates on the paper outlet and the printer becomes
jammed, disconnect the printer from the external power outlet and
clean the paper outlet with a cloth dipped in isopropyl alcohol.
3
3
Paper outlet
Internet Addresses
Brother Global Web Site: http://www.brother.com
Brother Developer Center: http://www.brother.com/product/dev/
For Frequently Asked Questions (FAQs), Product Support and Technical
Questions, and Driver Updates and Utilities: http://solutions.brother.com
Printing the Printer Set-up Information
You can use the
(Feed) button to print a report that lists the
following printer settings:
Program version
Printer usage history
Missing dot test pattern
Utility setting information
List of transferred data
Network setting information
Wi‑Fi setting information
Note
•
You can use the utility to set in advance which items will be printed.
•
The node name appears in the Printer Settings. The default node
name is "BRWxxxxxxxxxxxx". ("xxxxxxxxxxxx" is based on your
printer's MAC Address / Ethernet Address.)
a
Make sure that a roll of 101.6 mm receipt paper has been loaded
and the RD Roll compartment cover is closed.
b
Turn on the printer.
Press and hold the
(Feed) button until the POWER indicator
c
starts blinking in green.
The settings will be printed.
Note
•
To print the Printer Settings, we recommend to use 101.6 mm
receipt paper.
•
This operation can also be performed using the RJ Utility.
For details, see the User's Guide on the CD‑ROM.