Brother SP-1 Manuel de démarrage rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Brother SP-1. Brother SP-1 4 pages.

Imprimer la page

Machine settings

Follow the LCD instructions to configure the machine settings.

• Check the software installation information.

Connect your mobile device to your machine

Follow these steps to complete the setup to print from your mobile device.

Visit

https://s.brother/snjumq3331/

download and install the Brother

Artspira app.

Connect your computer to your machine

Follow these steps to complete the setup to print from your computer.

Visit

https://s.brother/cs2ka/

to download and

install Brother software.

https://s.brother/cs2ka/

Can't Connect? Check the following:

Wireless network

Wired network

USB connection

Manual wireless setup

If the wireless setup is not successful, try to set up the connection manually.

Find your SSID (Network Name) and Network Key (Password) on your

wireless access point/router and write them in the table provided on the right.

SSID: XXXXXXX

Network key: XXXX

If you cannot find this information, ask your network

administrator or wireless access point/router

manufacturer.

■

Tips!

For detailed machine information and product specifications, see the Online User's Guide at https://s.brother/cm2ab/.

1. Tap

in the upper right corner of the Artspira home

screen.

2. Select Creative Printer

3. Follow the on-screen instructions to set up your

machine's wireless network connection. When the

connection succeeds, Artspira searches for connectible

printers.

4. Select your machine's model name from the list that

appears. When your mobile device and machine are

connected, a check mark appears next to the printer in

the list.

Follow the on-screen instructions and prompts.

NOTE

For Wired Network Connection and USB Connection,

locate the correct port (based on the cable you are using)

inside the machine as shown.

Restart your wireless access point/

router (if possible).

Disconnect the cable.

Go to your machine,

and press

[Find Wi-Fi Network] >

[Yes].

Look in this location for more tips on creating sublimation projects!

Select your language

(if needed)

1. Press

[Settings] > [All Settings] > [Initial Setup] > [Local Language].

2. Press your language.

3. Press

Restart your machine and

computer, and then go to

SSID (Network Name)

Network Key (Password)

Select the SSID (Network Name) for your

access point/router and enter the Network

Key (Password).

When the wireless setup is successful, the

LCD displays [Connected].

If setup is not successful, restart your Brother

machine and your wireless access point/router,

and repeat

Setup Finished

You can now print from your mobile device.

1. Select the design you want to print from the Artspira's

home screen and tap Create.

2. Customize the design and when finished tap Print.

You can also print directly from your mobile devices using

AirPrint. For more information, see the Online User's Guide

at https://s.brother/cm2ab/.

Setup Finished

You can now print from your computer.

To check for the latest firmware, visit

https://s.brother/cu2ka/.

Important Notice for Network Security:

The default password to manage this machine's

settings is located on the back of the machine

and marked "Pwd". We recommend immediately

changing the default password to protect your

machine from unauthorized access.

If still not successful, go to

If still not successful, visit

for FAQs and Troubleshooting.

https://s.brother/cf2ab/

Go to

to install

software.