Brother TD-4420TN Manuel de l'utilisateur - Page 35

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Brother TD-4420TN. Brother TD-4420TN 44 pages. Cutter module
Également pour Brother TD-4420TN : Manuel d'installation (2 pages)

Imprimer la page

1. Troubleshooting

After the initialization, the following factory settings will be restored:

Parameter

Speed

Density

Label Width

Label Height

Sensor Type

Gap Setting

Print Direction

Reference Point

Offset

Tear Mode

Label Peeler Off Mode

Cutter Mode

Code Page

Country Code

Clear Flash Memory

4.3.4 Media Sensor Calibration (For the Black Mark Sensor)

1. Turn off the printer.

2. Press and hold the Feed/Pause Button, and then turn on the printer.

3. Release the button after the green LED flashes five times and when the LED is lit in

green/amber.

Note

The LED color will change as follows:

Amber  red (5 times)  amber (5 times)  green (5 times)  green/amber (5 times) 

red/amber (5 times)  green (lit)

Default Values

127 mm/sec (5 ips) (203DPI)

76 mm/sec (3 ips) (300DPI)

4" (101.5 mm)

Gap Sensor

0.12" (3 mm)

0,0 (upper left corner)

Off

850

001