AEG 914 550 925 Manuel de l'utilisateur - Page 32

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG 914 550 925. AEG 914 550 925 48 pages.

Imprimer la page

www.aeg.com

If the temperature and level

of the water in the drum are

too high and/or the drum still

rotates you cannot open the

door.

1. Touch the button Start/Pause.

In the display the related door lock

indicator goes off.

2. Open the appliance door. If

necessary, add or remove the items.

3. Close the door and touch the button

Start/Pause.

The programme or the delay start

continues.

4. The door can be opened when the

programme is complete, or set Spin/

Drain programme/option and than

press Start/Pause button.

13.12 End of the programme

When the programme has finished, the

appliance stops automatically. The

acoustic signals operate (if they are

active).

In the display all washing phase

indicators become steady and the time

area shows .

The indicator of the Start/Pause button

goes off.

The door unlocks and the indicator

goes off.

1. Press the On/Off button to deactivate

the appliance.

After five minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the

appliance again, the display

show the end of the last

selected programme. Turn

the programme dial to set a

new cycle.

2. Remove the laundry from the

appliance.

3. Make sure that the drum is empty.

4. Keep the door and the detergent

dispenser slightly ajar to prevent

mildew and odours.

5. Close the water tap.

13.13 Draining water out after

end of cycle

If you have chosen a programme or an

option that does not empty out the water

of the last rinse, the programme is

completed, but:

• The display shows the indicator , the

option indicator

door locked indicator

indicator of the running phase

flashes.

• The drum still turns at regular

intervals to prevent the creases in the

laundry.

• The door stays locked.

• You must drain the water to open the

door:

1. If necessary, touch the Spin button to

decrease the spin speed proposed

by the appliance.

2. Touch the Start/Pause button:

• If you have set

drains the water and spins.

• If you have set

only drains the water.

The option indicator

while the indicator

goes off.

3. When the programme is completed

and the door locked indicator

goes off, you can open the door.

4. Press the On/Off button a few

seconds to deactivate the appliance.

In any case, the appliance

empties the water out

automatically after

approximately 18 hours.

13.14 Stand-by option

The Stand-by function automatically

deactivates the appliance to decrease

the energy consumption when:

• You do not use the appliance for 5

minutes before you touch the Start/

Pause button.

Press the button On/Off to activate

the appliance again.

• After 5 minutes from the end of the

washing programme

and the

. The

, the appliance

goes out,

flashes and then