AEG EWF 1245 Livret d'instructions - Page 5

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} AEG EWF 1245. AEG EWF 1245 26 pages.

Imprimer la page

Installation

Unpacking

All transit bolts and packing must be

removed

before using the appliance.

You are advised to keep all transit devices so that

they can be refitted if the machine ever has to be

transported again.

Using a spanner unscrew and remove the two rear

bottom screws. Slide out the two plastic pins.

Lay the machine gently on its back, making sure

that the hoses are not squashed.

P1129

Remove the polystyrene block from the bottom of

the machine and release the two plastic bags.

Very carefully slide out the left polythene bag,

removing it towards the right and then downwards.

P1124

P1126

Repeat the operation for the right polythene bag,

removing it towards the left and then upwards.

P1127

All manuals and user guides at all-guides.com

P0001

Remove the polystyrene base.

Set the machine upright and unscrew the remaining

rear screw. Slide out the relevant pin.

Fill all the holes with the plastic plugs supplied with

the instruction booklet.

P1128

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is

not impeded by carpets, rugs etc. Check that the

machine does not touch the wall or other kitchen

units.

Carefully level by screwing the adjustable feet in or

out. Never place cardboard, wood or similar

materials under the machine to compensate for any

unevenness in the floor.

P1051

Water inlet

Connect the water inlet hose to a tap with a 3/4"

thread.

Do not use already employed hoses for water

connections.

The other end of the inlet hose which connects to

the machine can be turned in any direction. Simply

loosen the fitting, rotate the hose and retighten the

fitting, making sure there are no water leaks

P1088

P0002

P0021