Brother
Embellishment
Feet
21
Fringe Foot
Gathering Foot
Fringe Foot
Used to mark construction details by creating tailor tacks. Create 3-D
loops and fringe with a single zigzag stitch. Mark construction details
by creating tailor tacks.
Making loops or fringes:
1. Select zigzag stitch and set the stitch width to more than 5 mm.
2. Decrease the upper thread tension and test various settings to see which one works on
the fabric you are using.
3. Line up the center of the presser foot on a drawn pattern line and sew (cut the center of
loops to make fringes).
Creating tailor tacks:
SA142
1. Sew a few stitches to mark.
All Brother home-use sewing machines
2. Mark a guideline to follow on your fabric.
3. Line up the center of the foot with the guideline and sew.
Gathering Foot
Used for gathering fabrics. Ideal for clothing as well as home decor.
Works best on thin to medium weight fabrics.
For gathering:
1. Select a straight stitch, left needle position.
2. Increase the upper thread tension.
3. Place the fabric to be gathered under the presser foot.
To attach the gathered edge to a flat fabric:
1. Select a straight stitch, left needle position.
2. Increase the upper thread tension.
3. Place the fabric to be gathered, right side up, under the presser foot.
4. Slide the fabric not to be gathered into the slit in the presser foot with the surface
SA120
of the fabric facing down.
All Brother home-use sewing machines
Requires Low Shank Adapter for ULT series,
PC-6500, PC-8200 and PC-8500 sewing
machines.
Girl's Dress
Innov-is Project Book
(See page 47 for details.)
Open Toe Foot
Provides better visibility in the needle area. Ideal for securing edges of
appliqué, sewing curves, topstitching, etc.
Adding decorative stitches over seams or patterns:
Line up the center guide mark (red) of the presser foot to the seam or pattern line and sew.
For appliqué:
1. Line up the center guide mark (red) of the presser foot to the edge of appliqué.
2. Zigzag-sew with dense stitches.
Metal type
Metal type
SA146
SA186
IP
ABCDEFGHJKLMNO
Plastic type
SA147
ABCDEFGHJKLMNO
Pearls and Sequins Foot
Attaches threaded beads, sequins or rounded cords up to 4 mm in
size. Its wide groove also helps you to make or attach piping.
Also used for edge-stitching heavy fabric such as knits.
1. Adjust the upper thread tension.
2. Place threaded beads in groove of the foot.
3. Stitch in place using zigzag stitch with transparent thread.
Brother
Embellishment
Feet
Open Toe Foot
22
Pearls and Sequins Foot
SA150
ABCDEFJKMN
www.brother.com
Imprimer la page