Fujitsu Lifebook B3020 Manuel Bios - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel Bios pour {nom_de_la_catégorie} Fujitsu Lifebook B3020. Fujitsu Lifebook B3020 29 pages. Lifebook b series
Également pour Fujitsu Lifebook B3020 : Manuel Bios (38 pages)

Imprimer la page

L i f e B o o k B S e r i e s N o t e b o o k B I O S

Serial/Parallel Port Configurations Submenu of the Advanced Menu

The Serial/Parallel Port Configurations submenu allows

you to set the I/O addresses and interrupt levels for the

serial, touch panel, and parallel ports of your notebook

I/O addresses, DMA channels and

Interrupt levels can be entered in various

ways, including via the BIOS setup utility,

the control software for the I/O device, or

the hardware. If any two ports or devices,

serial or parallel, have the same I/O

address assigned, your notebook will not

function normally. Please keep a record of

original settings before making any

changes in the event that a restoration is

required. See your hardware and software

documentation as well as the setup utility

to determine settings, limitations, etc.

Serial Port:

I/O Address:

Interrupt:

Touch Panel:

I/O Address:

Interrupt:

Parallel Port:

Mode:

I/O Address:

Interrupt:

Help

ESC

Exit

PhoenixBIOS Setup Utility

Advanced

Serial/Parallel Port Configurations

Select Item

-/Space

Select Menu

Figure 4. Serial/Parallel Port Configurations Submenu

• To prevent IRQ and address conflicts,

• The BIOS will warn you of a resource

All I/O addresses in Table 4 are in hexadecimal.

[Enabled]

[3F8 - 3FF]

[IRQ 4]

[Enabled]

[2E8 - 2EF]

[IRQ 3]

[Enabled]

[Bi-directional]

[378 - 37F]

[IRQ 7]

Change Values

Enter

Select

Sub-Menu

avoid changing the default settings. If

you must change the settings, you can

call 1-800-8FUJITSU for technical assis-

tance.

conflict by placing a yellow asterisk next

to each device that is in conflict.

Item Specific Help

[Disabled]

The port is disabled.

[Enabled]

The port is enabled

with user configuration.

[Auto]

Plug & Play OS

configure the port.

Setup Defaults

F10

Save and Exit