AEG L 60260 TL1 Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG L 60260 TL1. AEG L 60260 TL1 24 pages. Aeg washing machine
Également pour AEG L 60260 TL1 : Manuel de l'utilisateur (24 pages)

Imprimer la page

www.aeg.com

10.8 Behaviour of the

appliance

10.9 Starting a programme

with the delay start

1. Press button Delay Start again and

again until the display shows the

delay you want to set.

2. Press button Start/Pause.

The appliance starts the countdown of

the delay start.

When the countdown is completed, the

programme starts automatically.

10.10 Cancelling the delay

start

To cancel the delay start:

1. Press button Start/Pause to set the

appliance to pause.

The related indicator flashes.

2. Press button Delay Start repeatedly

until the display shows .

3. Press button Start/Pause again to

start the programme immediately.

The drain pump can operate

for a short time when the

appliance fills water.

After approximately 15

minutes from the start of the

programme:

• The appliance adjusts

automatically the cycle

time to the laundry you

have put in the drum to

have perfect washing

results in the minimum

necessary time.

• The display shows the

new time value.

Before you press button

Start/Pause to start the

appliance, you can cancel or

change the set of the delay

start.

10.11 Interrupting a

programme and changing a

function

You can change only some options

before they operate.

1. Press button Start/Pause.

The related indicator flashes.

2. Change the function set.

3. Press the button Start/Pause again.

The programme continues.

10.12 Cancelling a programme

1. Turn the programme knob to

cancel the programme.

2. Turn again the programme knob to a

new washing programme. At this

time you can also set the available

functions.

Before starting the new

programme the appliance

drains the water. Make sure

that the detergent is still in

the detergent compartment,

if not fill the detergent

again.

10.13 Opening the door when

the programme operates

CAUTION!

If the temperature and level

of the water in the drum are

too high, the door lock

indicator

you cannot open the door.

To open the door proceed as follows:

1. Press the button On/Off for some

seconds to deactivate the appliance.

2. Wait for some minutes and then

open carefully the appliance door.

3. Close the appliance door.

4. Activate the appliance and set the

programme again.

10.14 Opening the door when

the delay start is active

While the delay start operates, the

appliance door is locked.

stays on and