AEG L 61470 BI Manuel de l'utilisateur - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG L 61470 BI. AEG L 61470 BI 36 pages. Washing machines
Également pour AEG L 61470 BI : Manuel de l'utilisateur (36 pages)
Imprimer la page
7.2 Spin
When you set a programme, the
appliance automatically proposes a
default spin speed. Press this button
repeatedly to select the desired spin
speed. The corresponding indicator
illuminates.
Additional spin option:
Rinse Hold
• If you select this option, the water of
the last rinse is not drained out to
prevent the fabrics from creasing. The
corresponding indicator illuminates.
The washing programme stops with
the water in the drum. The drum turns
regularly to prevent the laundry
creases.
• The Door indicator is on. The door
stays locked to indicate that you must
drain the water.
To drain the water, please
read chapter "At the end of
the programme".
7.3 Stains
Set this option to add a stain phase to a
programme to treat heavily soiled or
stained laundry with stain remover. The
corresponding indicator illuminates.
This option increases the programme
duration.
This option is not available
with a temperature lower
than 40° C.
8. SETTINGS
8.1 Acoustic signals
The acoustic signals operate when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press the Spin button and the
Stains button simultaneously for 6
seconds.
Put the stain remover into compartment
.
7.4 Extra Rinse
Set this option to add rinsing phases to a
programme. The corresponding
indicator illuminates.
Useful for people allergic to detergents
and in areas where the water is soft.
The phase indicator Extra Rinse
illuminates.
7.5 Time Save
With this option you can decrease the
programme duration:
• Press this button once to set
"Shortened duration" for items with
daily soil.
• Press this button twice to set "Extra
Quick" for slightly soiled items only.
The display shows the decreased
washing time.
Some programmes accept
only one of the two options.
7.6 Delay start
With this option you can delay the start
of a programme from 30 min to 20 hours.
The display shows the delay time value
for some seconds, then it shows the
duration of the programme again.
The Delay start indicator appears on the
display.
If you deactivate the
acoustic signals, they
continue to operate when
the appliance has a
malfunction.
8.2 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
press Temp. and Spin simultaneously
ENGLISH
13