AEG L 71670 FL Manuel de l'utilisateur - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG L 71670 FL. AEG L 71670 FL 36 pages.
Également pour AEG L 71670 FL : Manuel de l'utilisateur (36 pages)
Imprimer la page
2.
Press button
1
the appliance. Now, you can set a
new washing programme.
The appliance does not drain the
water.
8.6 Change a function
You can change only some functions be-
fore they operate.
1.
Press button
4
flashes.
2.
Change the function set.
8.7 Set the delay start
1.
Press button
5
til the display shows the number of
minutes or hours. The related sym-
bols comes on.
2.
Press button
4
starts the countdown of the delay
start.
When the countdown is completed,
the programme starts automatically.
Before you press button
start the appliance, you can can-
cel or change the set of the delay
start.
8.8 Cancel the delay start
1.
Press button
4
tor flashes.
2.
Press button
5
til the display shows 0'.
3.
Press button
4
starts.
8.9 Open the door
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1.
Press button
4
symbol in the display goes off.
2.
Open the appliance door.
3.
Close the appliance door and press
button
4
. The programme or the
delay start continues.
again to activate
. The indicator
again and again un-
, the appliance
to
4
. The related indica-
again and again un-
. The programme
. The door lock
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the
door. To open the door do the
steps that follow:
1.
Deactivate the appliance.
2.
Wait for some minutes.
3.
Make sure that no water is in
the drum.
If you deactivate the appliance, it
is necessary to set the pro-
gramme again.
8.10 At the end of ht
eprogramme
• The appliance stops automatically.
• The acoustic signals operate.
• In the display
• The indicator of the Start/Pause but-
ton
4
goes off.
• The door lock symbol goes off.
• Press button
to deactivate the ap-
1
pliance. After five minutes from the
end of the programme, the energy
saving function automatically deacti-
vates the appliance.
When you activate the appliance
again, the display show the end
of the last set programme. Turn
the programme knob to set a
new cycle.
• Remove the laundry from the appli-
ance. Make sure that the drum is emp-
ty.
• Keep the door ajar, to prevent mildew
and odours.
• Close the water tap.
The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent
the creases in the laundry.
– The door stays locked.
– You must drain the water to open the
door.
To drain the water:
1.
If necessary, decrease the spin
speed.
ENGLISH
17
comes on.