AEG L 73281 FL Manuel de l'utilisateur - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG L 73281 FL. AEG L 73281 FL 24 pages.
regularly to prevent the laundry crea-
ses.
• The door stays locked. You must drain
the water to unlock the door.
• The display shows the indicator
To drain the water refer to 'At
the end of the programme'.
7.3 Stain (Nódoas)
Set this option to add the stain phase to
a programme.
Use this option for laundry with hard
stains to remove.
When you set this option, put the stain
remover into compartment
This option increases the pro-
gramme duration.
This option is not available with a
temperature lower than 40 °C.
7.4 Extra Rinse (Enxag. extra)
With this option you can add some rin-
ses to a washing programme.
Use this option for persons allergic to
detergents and in areas where the water
is soft.
The related indicator comes on.
7.5 Time save (Poupar Tempo)
With this option you can decrease the
programme duration.
• Press this button one time to set
'Shortened duration' for items with
daily soil.
• Press this button two times to set 'Ex-
tra Quick' for items with almost no
soil.
Some programmes accept only
one of the two functions.
7.6 Delay Start (Início Diferido)
With this option you can delay the start
of a programme from 30 minutes to 20
hours.
The display shows the related indicator.
7.7 Child Lock
With this option you can prevent that the
.
children play with the control panel.
• To activate/deactivate this option,
press Temp. °C and Centrif. at the
same time until the indicator
comes on/goes off.
You can activate this option:
• After you press Início/Pausa, the op-
tions and the programme knob are
locked.
• Before you press Início/Pausa: the ap-
pliance cannot start.
.
7.8 Permanent extra rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
press Poupar Tempo and Início Diferi-
do at the same time until the indicator
Enxag. extra comes on/goes off.
7.9 Acoustic signals
The acoustic signals operate when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press Nódoas and Enxag. extra at
the same time for 6 seconds.
ENGLISH
If you deactivate the acoustic sig-
nals, they continue operate when
the appliance has a malfunction.
11