Fujitsu Lifebook N3510 Manuel de l'utilisateur - Page 25
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fujitsu Lifebook N3510. Fujitsu Lifebook N3510 48 pages. Lifebook n series
Également pour Fujitsu Lifebook N3510 : Pour commencer (2 pages), Manuel Bios (21 pages)
Before recording
Instant MyMedia can record the TV program being viewed on a DVD-RAM disc.
• The procedures in this section assume that you are in TV mode.
• If in a pre-boot environment, you can only record to DVD-RAM discs.
• Instant MyMedia cannot record TV programs to a hard disk or using a timer. For
recording to the hard disk or recording using the timer, refer to the WinDVR
manual.
Initializing a DVD disc
If you use a new DVD-RAM disc or a DVD-RAM disc used in other applications, it must be
initialized before recording.
If you want to record on a disc after deleting old programs recorded with Instant MyMedia, the
disc must be initialized.
For double-sided DVD-RAM discs, initialize one side first, then the second side.
If data is written on a DVD-RAM disc, it will be deleted when the disc is initialized.
1.
Insert the DVD-RAM disc you want to format into the notebook's multi-format drive.
If a disc for PC data is installed, a message stating so will appear. Follow the instructions
on the screen to format the disc.
2.
Press the [Menu] button while in TV mode.
3.
Using the cursor control buttons, select the Disc Management tab.
4.
Select "Quick format" or "Full format" and press the [Enter] button. Formatting will
start.
Perform "Full format" in the following cases:
• When Instant MyMedia does not identify the disc even though "Quick Format"
has already been performed previously.
• When recording has failed
• When using a new disc
• When using a disc used in writing data on the notebook
It takes about 75 minutes for "Full Format."
5.
When formatting has been completed, recordable time for the disc is indicated. Note that
the percentage indicator showing progress status may abruptly accelerate at around 80%.
In this case, initialization may have terminated, but the disc has been initialized without
any problem. During the initialization, all operations become ineffective.
23