Brother P-touch PT-D610BT Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Brother P-touch PT-D610BT. Brother P-touch PT-D610BT 9 pages.
Également pour Brother P-touch PT-D610BT : Manuel (9 pages), Manuel de démarrage rapide (9 pages)

Imprimer la page

• DO NOT use the Label Maker in special environments, such as near medical equipment. Electromagnetic

waves may cause the medical equipment to malfunction.

• Users with heart pacemakers must move away from the Label Maker if they sense any abnormalities. Then,

immediately seek the advice of a medical professional.

• DO NOT forcibly bend or pull the USB Cable or AC Adapter.

• DO NOT touch the AC Adapter or plug with wet hands, otherwise an electrical shock may occur.

• Use only the specified AC Adapter.

• Use only the AC Adapter and USB Cable included with your Label Maker. Failure to do so may result in an

injury to yourself or others, or damage to the Label Maker, or other property. Brother does not assume any

responsibility for any accident or damage resulting from not using the specified AC Adapter and USB Cable.

• DO NOT connect the included AC Adapter and USB Cable to other products.

• Use the AC Adapter with standard electrical sockets (AC 100 V - 240 V 50/60 Hz).

• Insert the plug firmly into the electrical outlet.

• DO NOT use the batteries if they are damaged or leaking.

• Keep batteries away from infants. If batteries are ingested, contact emergency services immediately.

• DO NOT use sharp objects, such as tweezers or a metallic pen, to remove or replace batteries.

• If liquid (electrolyte) from the batteries gets into the eyes, wash them immediately with clean water. Contact

emergency services immediately.

• DO NOT solder connections to the batteries.

• DO NOT use the batteries with the polarity (+) (-) reversed.

• DO NOT connect the + and - terminals with metal objects such as

wire.

• DO NOT incinerate the batteries or dispose of them with household

waste.

• Keep fingers and other body parts away from the Cutter Unit.

• DO NOT touch the Cutter Unit's blade or insert your fingers inside

the Tape Exit Slot, otherwise fingers and other body parts may be

injured.

• DO NOT touch any metal parts near the Print Head. The Print

Head becomes very hot during and immediately after use.

DO NOT touch it directly with your hands.

CAUTION

Failure to observe instructions and warnings could result in minor or moderate injuries.

Label Maker, USB Cable, AC Adapter, Alkaline Batteries

• Use only the specified AA alkaline batteries (LR6).

• DO NOT use combinations of old and new batteries or combinations of different types, charging levels,

manufacturers, or models.

• DO NOT drop the Label Maker when removing it from the box or relocating it, otherwise you may get injured.

• Be careful when closing the Tape Cassette Compartment Cover. There is a risk of injury if your finger gets

pinched between the upper and lower parts of the cover.

• When you are not using the Label Maker, store it out of the reach of children. In addition, do not allow

children to put the Label Maker parts or labels in their mouths. If any object has been swallowed, seek

medical attention immediately.

• DO NOT leave the Label Maker or any tape within the reach of babies and children.

• Store the Label Maker on a flat, level, and stable surface.

• Remove the batteries and disconnect the AC Adapter if you do not intend to use the printer for an extended

period of time.

• DO NOT press on the Liquid Crystal Display (LCD).

• When disconnecting the AC Adapter from the electrical outlet, always hold the AC Adapter.

• DO NOT overload an electrical circuit with the AC Adapter.

• DO NOT open the Tape Cassette Compartment Cover when operating the Cutter Unit.

• DO NOT apply excessive pressure to the Cutter Unit.

Use the Label Maker

1. Print from the Label Maker

STEP

Press OK to select "Create Label"

STEP

Type Text

STEP

Preview Label

STEP

Print Label

• Follow the on-screen instructions to print your labels.

• For more information about changing the printer settings, see the Basic

Operations section.

Regulation

This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the

following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired

This equipment complies with IC radiation exposure limits set forth for an uncontrolled

environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment

has very low levels of RF energy that it deemed to comply without maximum permissive exposure

evaluation (MPE). [※But it is desirable that it should be installed and operated keeping the

radiator at least 20 cm or more away from person's body.]

International ENERGY STAR

The purpose of the International ENERGY STAR

development and popularization of energy-efficient office equipment. As an ENERGY

STAR

ENERGY STAR

1 Print Head

2 Cutter Unit

operation of the device.

Compliance Statement (US only)

Partner, Brother Industries, Ltd. has determined that this product meets the

guidelines for energy efficiency.

Program is to promote the