Brother P-touch PT-D800W Manuel d'installation rapide - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother P-touch PT-D800W. Brother P-touch PT-D800W 9 pages. Electronic
Également pour Brother P-touch PT-D800W : Manuel de sécurité des produits (17 pages)

Imprimer la page

Installing the Software and Printer Driver to a Computer

To print from your Windows

computer or Mac, install the printer driver, Cable

Label Tool, P-touch Editor and other applications to your computer.

Visit our website (www.brother.com/inst) and download the installer

for the software and manuals.

Double-click the downloaded .exe file and follow the on-screen

instructions to proceed with the installation.

NOTE

To connect the P-touch labeling system to a computer using a wireless

connection:

•

We recommended configuring the wireless network settings while

installing the software. You can change the settings later using

[Settings] in the Home screen or the Printer Setting Tool. For more

information, see the User's Guide.

•

We recommended installing the software on a computer wirelessly

connected to your network and configuring the P-touch labeling

system using a USB cable.

•

We recommend preparing the SSID (network name) and password

(network key) of the wireless network in advance.

•

If your wireless access point/router supports WPS, you can use

one-push WPS (Wi-Fi Protected Setup) to quickly configure the

wireless network settings.

Close the dialog box when the installation is complete.

Connecting the P-touch Labeling System to a Computer

You can connect the P-touch labeling system to a Windows

Mac using a USB cable, or wireless LAN. For more information, see the

User's Guide.

 Connecting Using USB

Connect the P-touch labeling system end of the USB cable to the USB

port on the back of the P-touch labeling system.

Connect the other end of the USB cable to the USB port on the

computer.

Turn the P-touch labeling system on.

 Connecting Using Wi-Fi

Turn the P-touch labeling system on.

Press and hold the

(Wi-Fi) button on your P-touch labeling system

for one second to turn the Wi-Fi function on. The

starts flashing in green once every three seconds.

• Ad-Hoc Mode

For Windows, after installing the printer driver and other applications

to your computer, set the Ad-Hoc mode using the Printer Setting Tool

installed on the computer. (See the User's Guide.)

For Mac, set the Ad-Hoc mode using the Wireless Device Setup

Wizard.

Troubleshooting

LCD Problems

Problem

Solution

The screen is locked, or

Reset the internal memory to the factory

the P-touch labeling

settings. For more information, see the User's

system does not respond

Guide. If resetting the P-touch labeling system

normally.

does not solve the problem, disconnect the AC

adapter and remove the battery for more than

10 minutes.

The display remains blank

The P-touch labeling system is receiving no

after turning on the power.

power.

If using AC power, connect the AC adapter

The POWER indicator

correctly to the P-touch labeling system and an

does not light

electrical socket.

If using a rechargeable Li-ion battery, make

sure the rechargeable Li-ion battery is firmly

installed in the P-touch labeling system and is

fully charged.

The LCD messages are

See Setting Language and Unit in this guide to

displayed in a foreign

select the language you want.

language.

Printing Problems

Problem

The label is not printed.

The label is not printed

correctly.

The tape is jammed.

The ink ribbon is separated

from the ink roller.

computer or

The P-touch labeling

system stops while printing

a label.

The label is not cut

automatically.

A tape jam error cannot be

(Wi-Fi) indicator

cleared despite following

the troubleshooting steps.

I want to make fine

adjustments to the print

result.

Version Information

Problem

I do not know the version

number of the firmware of

my P-touch labeling

system.

I want to confirm whether I

am using the latest version

of the software.

Solution

• Check that text has been entered and that

the tape cassette is installed correctly with

sufficient tape remaining.

• If the tape is bent, cut off the bent section and

thread the tape through the exit slot.

• When printing from a computer or mobile

device, make sure the computer or mobile

device is connected correctly to the P-touch

labeling system.

• Remove the tape cassette and reinstall it,

pressing it firmly until it locks into place.

• If the print head is dirty, clean it with a dry

cotton swab or optional print head cleaning

cassette (TZe-CL6). If the quality of the

printed characters is poor even after wiping

the label print head, wipe the label roller with

a dry cotton swab. See the User's Guide.

If the tape is jammed, remove the tape

cassette, and then pull out the jammed tape

and cut it. Check that the end of the tape passes

through the guide before reinstalling the tape

cassette.

If the ink ribbon is broken, replace the tape

cassette. If not, leave the tape uncut and

remove the tape cassette, then wind the loose

ink ribbon onto the spool as shown in the figure.

Spool

• Replace the tape cassette if striped tape is

visible, as this indicates that you have

reached the end of the tape.

• Connect the AC adapter directly to the

P-touch labeling system, or charge the

rechargeable Li-ion battery.

Check the Cut Option setting. For more

information, see the User's Guide.

To cut labels manually, press the

and Cut) button to feed and cut the tape.

Contact Brother customer service.

The length and margins can be adjusted in the

"Printer Setting Tool". For more information,

see User's Guide.

Solution

The version number and other information for

the firmware can be confirmed using the

following procedure:

Select [Settings] in the Home screen

using the

press the OK or Enter key.

Select [Version Information] using the

key, and then press the OK or

Enter key.

In addition, you can also use the following

procedure.

Turn your P-touch labeling system on.

Press and hold the

(Feed and Cut)

button for more than 10 seconds to print the

report.

(Use 24 mm or 36 mm tape.)

For more information, see the User's Guide.

Use the P-touch Update Software to confirm if

you have the latest version.

See the User's Guide for more information

about the P-touch Update Software.

(Feed

key, and then