AEG L 75678 FL Manuel de l'utilisateur - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG L 75678 FL. AEG L 75678 FL 32 pages.
16
2. Press button
starts the countdown of the delay
start.
When the countdown is completed,
the programme starts automatically.
Before you press button
start the appliance, you can can-
cel or change the set of the de-
lay start.
You cannot set the delay start
with the Steam programme.
CANCEL THE DELAY START
1. Press button
cator flashes.
2. Press button
until the display shows 0'.
3. Press button
starts.
OPEN THE DOOR
While a programme or the delay start
operates, the appliance door is locked.
AT THE END OF PROGRAMME
• The appliance stops automatically.
• The acoustic signals operate.
• In the display
• The indicator of the Start/Pause but-
ton
4
• The door lock symbol goes off.
• Press button
pliance. After five minutes from the
end of the programme, the energy
saving function automatically deacti-
vates the appliance.
When you activate the appli-
ance again, the display show the
end of the last set programme.
Turn the programme knob to
set a new cycle.
• Remove the laundry from the appli-
ance. Make sure that the drum is
empty.
• Keep the door ajar, to prevent mil-
dew and odours.
4
, the appliance
4
. The related indi-
5
again and again
4
. The programme
comes on.
goes off.
to deactivate the ap-
1
To open the appliance door:
1. Press button
symbol in the display goes off.
2. Open the appliance door.
3. Close the appliance door and press
button
4
to
delay start continues.
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the
door. To open the door do the
steps that follow:
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is in
If you deactivate the appliance,
it is necessary to set the pro-
gramme again.
• Close the water tap.
The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent
the creases in the laundry.
– The door stays locked.
– You must drain the water to open the
door.
To drain the water:
1. If necessary, decrease the spin
speed.
2. Press the Start/Pause button
The appliance drain the water and
spin.
3. When the programme is completed
and the door lock symbol goes off,
you can open the door
4. Deactivate the appliance.
4
. The door lock
4
. The programme or the
the drum.
4
.