AEG L 76270 SL Manuel de l'utilisateur - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG L 76270 SL. AEG L 76270 SL 32 pages.
Imprimer la page
www.aeg.com
8
4.6 Time save button
Press the button
programme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.
4.7 Extra rinse button
Press button
a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
4.8 Stain button
Press button
to a programme.
Use this function for laundry with hard
stains to remove.
When you set this function, put the stain
remover into compartment
This function increases the pro-
gramme duration.
This function is not available with
a temperature lower than 40° C.
4.9 Spin button
Press this button to:
• Decrease the maximum speed of the
spin phase when you set a pro-
gramme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the wa-
ter when the programme is comple-
ted.
6
6
to decrease the
7
7
to add rinsing phases to
8
8
to add the stain phase
.
9
Spin phase is off.
'Rinse Hold' function is
on.
4.10 Temperature button
Press button
10
to change the default
temperature.
- -
= cold water
4.11 Acoustic signals function
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press button
the same time for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate only
when you press the buttons and
when a malfunction occurs.
4.12 Child lock function
This function prevents children to play
with the control panel.
• To activate the function, press button
10
and button
9
until the display shows the symbol
• To deactivate the function, press but-
ton
10
and button
time until the symbol
You can activate the function:
• Before you press the Start/Pause but-
ton
: the appliance cannot start.
4
• After you press the Start/Pause button
4
, all the buttons and the pro-
gramme knob are deactivated.
4.13 Permanent extra rinse
function
With this function you can keep the extra
rinse function permanently on when you
set a new programme.
• To activate the function press button
and button
6
5
until the indicator of button
• To deactivate the function press but-
ton
6
and button
10
8
and button
7
at
at the same time
9
at the same
goes off.
at the same time
7
is on.
5
at the same
.