Brother PT-2040SC Manuel de l'utilisateur - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Brother PT-2040SC. Brother PT-2040SC 17 pages.
Setting Margins
The laminate mechanism creates a margin of
about 1" (25 mm) at the beginning of printing. You
can reduce this margin by printing labels
continuously.
You can also change the margin before and after
the text.
[Margin]
[Full / Half / Narrow / Chain Print]
[Full] / [Half] / [Narrow]
• The printed dots (:) indicate the end of the label.
Cut along the printed dots (:) with scissors.
When printing a single sheet:
abc
Full
1"
(25 mm)
Half
:
1"
(25 mm)
:
Narrow
1"
(25 mm)
(4 mm)
When printing multiple sheets:
abc
Full
1"
(25 mm)
Half
:
1"
(25 mm)
(12 mm)
:
Narrow
1"
(25 mm)
(4 mm)
When selecting Half and Narrow margins, a
mark will immediately follow the margin of about
1" (25 mm) indicating where to cut the label.
1"
(25 mm)
abc
0.47"
0.47"
(12 mm)
(12 mm)
abc
0.16"
0.16"
(4 mm)
abc
:
1"
1"
1"
(25 mm)
(25 mm)
(25 mm)
abc
abc
:
:
0.47"
0.47"
0.47"
0.47"
(12 mm)
(12 mm)
(12 mm)
abc
abc
:
:
0.16"
0.16"
0.16"
0.16"
(4 mm)
(4 mm)
(4 mm)
[Chain Print] (Tape-saving option)
Use this option to print multiple labels with the
narrowest margins. This feature saves tape.
Select [Chain Print] for the margin.
This setting does not print dots (:) indicating the
end of the label. Use scissors to remove any part
of margin that is not required.
Enter the text.
1.
Press
2.
appears on the LCD.
Press the number keys to enter the amount
3.
of copies you want to print.
Press
4.
Clear the text and re-enter the text you want
5.
on the next label.
Repeat steps 2 through 5.
6.
After the last label prints, feed the tape by
7.
pressing
Press the Tape Cutter Lever.
8.
NOTE
• Once the final label sheet prints, feed the tape
before pressing the Tape Cutter Lever (
cut off.
• Do not pull the tape, as this may damage the
Tape Cassette.
:
. The message [Set 1-9?1]
to start printing.
and
), otherwise part of the text may be
.
+