AEG L 85275 XFL Manuel de l'utilisateur - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG L 85275 XFL. AEG L 85275 XFL 40 pages.
Également pour AEG L 85275 XFL : Manuel de l'utilisateur (36 pages)

Imprimer la page

5) The default phase of the spin speed is related to cotton items. Set the spin speed. Make

sure that it agrees with the laundry. To select the DRAIN programme only, set the function

NO SPIN.

6) Press EXTRA RINSE button to add rinses. With a low spin speed the appliance performs

delicate rinses and a short spin.

7) Set this programme to decrease the time and the consumption of energy and water. Use a

special detergent for very low temperature.

8) Standard programmes for the Energy Label consumption values. According to

regulation 1061/2010, the «ECO 60 °C» and «ECO 40 °C» are respectively the «standard 60

°C cotton programme» and the «standard 40 °C cotton programme». They are the most

efficient programmes in terms of combined energy and water consumptions for washing

normally soiled cotton laundry.

STEAM PROGRAMMES

Programme

Steam Refresh

This cycle removes odours from the

laundry.

Steam does not remove ani-

mal odours.

Steam Anticrease

This cycle helps to dewrinkle the

laundry.

Steam can be used for dried, washed or worn once laundry. These pro-

grammes can reduce creases and odours and make your laundry more

soft.

Do not use any detergent. If necessary, remove stains by washing or using

localized stain removal.

Steam programmes do not perform any hygienic cycle.

Do not set the Steam programme for this type of items:

• items where it is not specified on the care label as being suitable for tumble-

drying

• all items with plastic, metal, wooden parts or alike.

1) If you set a Steam programme with dried laundry, at the end of the cycle the laundry feels

humid. It is better to expose the items to the fresh air for about 10 minutes to let the

humidity dry. When the programme is completed, quickly remove the laundry from the

drum. After a steam cycle, items may to be ironed anyway, but with less effort!

Type of load

Cotton and synthetic items

ENGLISH

Max load

up to 1.5