Brother PT-E550W Manuel d'installation rapide - Page 32
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother PT-E550W. Brother PT-E550W 50 pages. Electronic labeling system
Également pour Brother PT-E550W : Manuel d'installation rapide (47 pages), Manuel d'installation rapide (49 pages)
Imprimer la page
GETTING STARTED
4
Close the rear cover.
• Place the P-touch labeling system on a flat surface as shown
in the illustration, and then attach the rear cover.
• If you cannot attach the rear cover, check to ensure the white
lever (1) is in the up position. If not, lift the lever, and then
attach the cover.
• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to
be discharged with the tape. The tape may no longer be functional after the ink ribbon
discharges.
• Store tape cassettes in a cool dark location, away from direct sunlight and high temperature, high
humidity, or dusty locations. Use the tape cassette as quickly as possible after opening the sealed
package.
Extra Strength Adhesive Tape:
• For rough and textured surfaces, we recommend using Extra Strength Adhesive Tape.
• Although the instruction sheet included with the Extra Strength Adhesive Tape cassette
recommends cutting the tape with scissors, the tape cutter that this P-touch labeling
system is equipped with is able to cut Extra Strength Adhesive Tape.
Press the
(Power) button to turn the P-touch labeling system on.
Press and hold the
• Your P-touch labeling system has a power saving function that automatically turns itself off if
no key is pressed within a certain time, under certain operating conditions. Refer to the "Auto
Power-Off Time" for details.
Auto Power-Off Time
If you use the AC adapter or Li-ion battery, you can change the setting of the auto power-off
time.
When you use alkaline batteries or Ni-MH batteries, the auto power-off time cannot be changed.
(The time is fixed to 20 minutes.)
1
Press the Menu key, select "Auto Power Off" using the
OK or Enter key.
2
Select the battery shown on the LCD display by using the
using the
"AC Adapter" or "Li-ion Battery" can be selected.
3
Press the OK or Enter key.
32
Turning Power On/Off
Turning Power On/Off
(Power) button again to turn the P-touch labeling system off.
or
key.
1
or
key, and then press the
or
key and set the value