Brother PT-S215e Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Brother PT-S215e. Brother PT-S215e 18 pages.
Imprimer la page
Initial Settings
1
Turn your machine on.
Supply power by using six AAA batteries or the
optional AC Adapter, and then press
2
Set the language.
The default setting is [English].
/
/
Français / Hrvatski / Italiano /
Magyar / Nederlands / Norsk / Polski /
Português / Portug. (BR) / Românã /
Slovenski / Slovenský / Suomi /
Svenska / Türkçe / eština / Dansk /
Deutsch]
3
Set the unit of measurement.
The default setting is [inch].
/
/
NOTE
• The machine automatically turns off if no keys are
pressed within five minutes.
• To cancel any operation, press
• After pressing
approximately one second.
Contrast
This function allows you to set the brightness of the
LCD display. You can select from five levels of
brightness. The default setting is [0].
/
/
[-2 / -1 / 0 / +1 / +2]
• To return to the default setting, press
[Language]
[English / Español /
.
[Unit]
[inch / mm]
.
.
, [Accepted] appears for
[LCD Contrast]
Supplies and Accessories
Cassettes:
AC Adapter:
.
Cutter Unit:
Over time, the Cutter Blade may become blunt from
repetitive use. If the Cutter does not cut tape
cleanly, replace the Cutter Unit. Contact your local
authorized Brother reseller and order item TC-4, the
Cutter Unit.
Replacing the Cutter Unit
Remove the two sections of the Cutter Unit
1.
(green) in the direction of the arrows as
illustrated below
Install a new Cutter Unit. Push it in gently until
2.
it snaps into place.
Cutter
Board
WARNING
Do not touch the cutter blade directly with your
fingers.
.
See the included Supplies and
Accessories Guide.
AD-24ESA
TC-4 (replacement)
.