AEG L 98685 FL Manuel de l'utilisateur - Page 30

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG L 98685 FL. AEG L 98685 FL 40 pages. Front-loading washing machine
Également pour AEG L 98685 FL : Manuel de l'utilisateur (44 pages), Manuel de l'utilisateur (40 pages)

Imprimer la page

Trouble shooter and service

PROBLEM WITHOUT ALARM MESSAGE

Problem

The appliance does

not drain the water.

The spin phase does

not operate.

The programme does

not start.

There is water on the

floor.

You cannot open the

appliance door.

The appliance makes

an unusual noise.

The appliance fills

with water and drain

immediately.

The washing results

are not satisfactory.

Possible cause

A washing programme with-

out the drain phase is set.

The function Rinse Hold is on.

The spin phase is off.

The filter of the drain pump is

blocked.

Balance problems with the

laundry load.

The mains plug is not connec-

ted in the mains socket.

Blow out fuse in the house-

hold fuse box.

You did not touch button

The delay start is set.

The Child Lock function is ac-

tivated.

Leakages from the couplings

of the water hoses.

Leakages from the drain

pump.

The water drain hose is dam-

aged.

The washing programme is in

operation.

There is water in the drum.

Incorrect level of the appli-

ance.

You did not remove the pack-

aging and/or the transit bolts.

The load is very small.

The end of the drain hose is

too low.

The detergent you used was

not sufficient or correct.

Possible solution

Set the drain programme.

Set the spin programme.

Clean the filter of the drain pump. Refer

to 'Care and cleaning'.

Adjust manually the items in the tub

and start the spin phase again.

Put in the mains plug.

Replace the fuse.

. Touch button

If necessary to wash the laundry imme-

diately, cancel the delay start.

Deactivate the Child Lock function.

Make sure that the couplings are tight.

Make sure that the drain pump filter is

tight.

Make sure that the water inlet hose has

no damages.

Let the washing programme end.

Set the drain or the spin programme.

Adjust the level of the appliance. Refer

to 'Installation'.

Remove the packaging and/or the trans-

it bolts. Refer to 'Installation'.

Add more laundry in the drum.

Make sure that the drain hose is in the

correct position.

Increase the detergent quantity or use a

different one.