Brother QL 570 - P-Touch B/W Direct Thermal Printer Manuel de l'utilisateur - Page 32

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Brother QL 570 - P-Touch B/W Direct Thermal Printer. Brother QL 570 - P-Touch B/W Direct Thermal Printer 40 pages. Professional label printer
Également pour Brother QL 570 - P-Touch B/W Direct Thermal Printer : Brochure (4 pages), Manuel de l'utilisateur (36 pages), Manuel de l'utilisateur (26 pages), Manuel de configuration et d'utilisation (43 pages), Manuel de configuration et d'utilisation (45 pages), Manuel de l'utilisateur (2 pages), Manuel d'installation du logiciel (15 pages)

Appendix

Fonts and several bar codes are embedded within this machine. You can send commands to print embedded

characters and barcodes. (For QL-580N/QL-1050/QL-1060N only)

Commands available are P-touch proprietary commands based on ESC/P.

For details, see the "Command Reference" included in the CD-ROM.

([CD Drive]:\Doc\Technical)

The pin assignments for the serial cables (RS-232C cables) which can be used with this machine are shown

in the table below. You can purchase the cables at an electronics store. Do not use an interface cable that is

longer than 2.0 meters (6 feet).

Brother QL side

(D-sub female, lock screw #4-40 inch screw)

Signal

Name

Number

DCD

RXD

TXD

DTR

GND

DSR

RTS

CTS

• It is not possible to connect RS-232C cable and USB cable to the printer at the same time and use it.

• Connect only one cable which is used to communicate with the printer. (For QL-1050 only)

• The RS-232C serial connector part of this equipment is not Limited Power Source.

Pin Assignments

Available Commands

PC side

(D-Sub9P female)

Signal

Number

Name

DCD

RXD

TXD

DTR

GND

DSR

RTS

CTS