Brother QL 570 - P-Touch B/W Direct Thermal Printer Manuel de configuration et d'utilisation - Page 39

Parcourez en ligne ou téléchargez le pdf Manuel de configuration et d'utilisation pour {nom_de_la_catégorie} Brother QL 570 - P-Touch B/W Direct Thermal Printer. Brother QL 570 - P-Touch B/W Direct Thermal Printer 43 pages. Professional label printer
Également pour Brother QL 570 - P-Touch B/W Direct Thermal Printer : Brochure (4 pages), Manuel de l'utilisateur (36 pages), Manuel de l'utilisateur (26 pages), Manuel de l'utilisateur (40 pages), Manuel de configuration et d'utilisation (45 pages), Manuel de l'utilisateur (2 pages), Manuel d'installation du logiciel (15 pages)

Imprimer la page

Brother QL 570 - P-Touch B/W Direct Thermal Printer Manuel de configuration et d'utilisation

Problem

The P-touch Add-In icon is not

displayed on Microsoft

Cutter error

The printed barcode cannot be

read.

I want to reset the printer/delete

the data transferred from PC.

(QL-580N only)

I want to cancel the current

printing job. (QL-580N only)

When printing via the USB

cable, the printer repeatedly

pauses and then continues

printing. (QL-580N only)

• Is Microsoft

Microsoft

Word.

Due to program limitations, the Microsoft

not work with the above settings. Quit Microsoft

restart Microsoft

• If a cutter error occurs, keep the DK roll compartment cover

closed and press ON/OFF button. The cutter moves back to the

normal position and turns the machine OFF automatically. After

the machine is OFF, inspect the cutter unit and remove the

paper jam.

• Try using a different barcode scanner. We recommend you

print the barcode with "Give priority to print quality" enabled.

Also, make sure the label roll is inserted in the print head

straight to prevent misfeeds.

Print head

• To reset the machine, press and hold the ON/OFF button to

switch the machine OFF. Then, hold down the ON/OFF button

for two seconds. Continue holding down the ON/OFF button,

and press the CUT button six times. The machine will then

reset. All the transferred data from PC will be deleted and will

reset the machine to factory settings.

• Make sure that the printer is ON, and press the ON/OFF button.

• Is the printer set for sequential printing?

If so, set print mode to buffered printing. (Open printer

properties from [Control Panel]-[Printer and FAX] and click

[Printing Preferences...] button in the [General] tab. Choose the

option "After one page of data is received".)

• An alternative solution is to disconnect the LAN cable until USB

printing is completed.

Solution

Word started up from Microsoft

Word chosen for the editor usually used for

Outlook

Word.

Label

Outlook

Word Add-In does

Outlook

, and

Recommended

print direction

STEP