AEG L 99696 HWD Manuel de l'utilisateur - Page 22
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG L 99696 HWD. AEG L 99696 HWD 48 pages. Front-loading washer
Imprimer la page
22
www.aeg.com
10.8 Starting a programme
with the delay start
1. Touch button Startuitstel again and
again to set the desired delayed
start.
The display show the expected end of
the programme.
2. Touch button Start/Pauze.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
10.9 Cancelling the delay start
1. Touch button Start/Pauze. The
related indicator flashes.
2. Touch button Startuitstel again and
again until the display tells that there
is no delay start.
3. Touch button Start/Pauze. The
programme starts.
10.10 Interrupting a
programme and changing the
options
You can change only some options
before they operate:
1. Touch button Start/Pauze.
The related indicator flashes.
2. Change the options.
3. Touch button Start/Pauze again.
The washing programme continues.
10.11 Cancelling a programme
1. Press button Aan/Uit to cancel the
programme and to deactivate the
appliance.
2. Press button Aan/Uit again to
activate the appliance.
Now, you can set a new washing
programme.
Before you touch button
Start/Pauze to start the
appliance, you can cancel or
change the set of the delay
start.
Before starting the new
programme the appliance
drains the water. Make sure
that the detergent is still in
the detergent compartment,
if not fill the detergent
again.
10.12 Opening the door
WARNING!
If the temperature and level
of the water in the drum are
too high and the drum still
rotates you cannot open the
door.
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1. Touch button Start/Pauze.
The door lock symbol in the display goes
off.
2. Open the appliance door.
3. Close the appliance door and touch
button Start/Pauze.
The programme or the delay start
continues
10.13 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signal operates (if it is active).
In the display
comes on and a
message tells you that the programme is
completed.
The indicator of Start/Pauze button goes
off.
1. Press the button Aan/Uit to
deactivate the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last set
programme. Turn the
programme knob to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.