Fujitsu N6110 1.86 Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fujitsu N6110 1.86. Fujitsu N6110 1.86 16 pages. Remote control user's guide
Imprimer la page
Setting up the BIOS for use of remote control
In order to allow the remote control to communicate with the
remote control receiver, you must first change one of the settings in
the system BIOS. To do so, perform the following steps:
1. Turn on or restart your notebook.
2. Press the [F2] key once the Fujitsu logo appears on the screen.
This will open the main menu of the BIOS Setup Utility with
the current settings displayed.
3. Press the right and left arrow keys to move to the Advanced
menu.
4. Using the arrow keys, go to Miscellaneous Configurations and
press the [Enter] key.
5. From the Miscellaneous Configurations submenu, select Wake
On USB. Press the arrow keys or spacebar (depending upon
your notebook model) to change the state of Wake On USB to
[Enabled].
6. Press the [F10] key. Click [Yes] to save the settings and exit the
BIOS Setup Utility. You will return to Windows.
9