Fujitsu P1610 - LifeBook - Core Solo 1.2 GHz Procédure technique - Page 2

Parcourez en ligne ou téléchargez le pdf Procédure technique pour {nom_de_la_catégorie} Fujitsu P1610 - LifeBook - Core Solo 1.2 GHz. Fujitsu P1610 - LifeBook - Core Solo 1.2 GHz 3 pages. Upper case replacement
Également pour Fujitsu P1610 - LifeBook - Core Solo 1.2 GHz : Manuel Bios (28 pages), Addendum au manuel de l'utilisateur (2 pages), Manuel facile (37 pages), Procédure technique (6 pages), Procédure technique (3 pages), Procédure technique (3 pages), Procédure technique (4 pages), Procédure technique (7 pages), Procédure technique (9 pages), Procédure technique (7 pages), Procédure technique (9 pages), Procédure technique (6 pages)

5. Gently slide the pry tool between

the screen and the front cover to

release the tape.

7. Extract 2 screws from the

Fingerprint Sensor board.

9. Connect the cable to the new

Fingerprint Sensor board and place it

into the rear cover.

11. Press the front cover into place

and secure it with 8 screws.

6. Lift the front cover off.

8. Disconnect the cable from the

board and lift it out.

10. Secure it with 2 screws.

12. Place 8 screw covers over these

screws.