Fujitsu S2020 - LifeBook - Athlon XP-M 1.67 GHz Manuel Bios - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel Bios pour {nom_de_la_catégorie} Fujitsu S2020 - LifeBook - Athlon XP-M 1.67 GHz. Fujitsu S2020 - LifeBook - Athlon XP-M 1.67 GHz 28 pages. Fujitsu lifebook s series

Fujitsu S2020 - LifeBook - Athlon XP-M 1.67 GHz Manuel Bios
Menu Field
Options
Heads:
A number between
1 and 16
Sectors:
A number between
0 and 63
Maximum
Display only
Capacity:
Multi-Sector
Disabled
Transfers:
2 Sectors
4 Sectors
8 Sectors
16 Sectors
LBA Mode Control:
Disabled
Enabled
Transfer Mode:
Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
Multiword DMA 1
Multiword DMA 2
Ultra DMA Mode:
Disabled
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
A bootable CD-ROM may have either a floppy disk or hard drive format. When the bootable CD-ROM is
used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format
CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive for-
mat) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: des-
ignation if a formatted internal hard drive is present since the C: designator is always reserved for the
internal hard drive.The boot sequence ignores the new drive designations, however, your application soft-
ware will use the new designations.
Be aware of the operating environment when booting from a CD-ROM or you may overwrite files by
mistake.
Default
Description
–—
This item is active only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
–—
This item is active only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
–—
Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Auto is selected and the type
is identified as hard disk.
[16 Sectors]
This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer.
[Enabled]
Enables or disables logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when Auto
is selected.
[Multiword
Selects the method for moving data to/from the drive. Autotype the
DMA 2]
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.
[Disabled]
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.
7
M a i n M e n u