AEG L6FBI741N Manuel de l'utilisateur - Page 29

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG L6FBI741N. AEG L6FBI741N 36 pages.

Imprimer la page

Problem

The appliance makes an

unusual noise and vi-

brates.

The programme duration

increases or decreases

during programme exe-

cution.

The washing results are

not satisfactory.

Too much foam in the

drum during the washing

cycle.

After the washing cycle,

there are some deter-

gent residues in the dis-

penser drawer.

After the check, activate the appliance. The programme continues from the point of

interruption.

If the problem occurs again, contact the Authorised Service Centre.

If the display shows other alarm codes. Deactivate and activate the appliance. If the

problem continues, contact the Authorised Service Centre.

14. CONSUMPTION VALUES

Stated values are obtained in laboratory conditions with relevant stand-

ards. Different causes can change the data: the quantity and type of

laundry and ambient temperature. Water pressure, the supply voltage

and the temperature of inlet water may also affect the washing pro-

gramme duration.

Technical specifications may be changed without prior notice to improve

the quality of product.

During the washing programme, the Prosense technology can vary the

wash duration and the consumption values. For more details see 'The

Prosense load detection' paragraph in 'Daily Use' chapter.

Possible solution

• Make sure the levelling of the appliance is correct. Refer to

'Installation instruction'.

• Make sure that the packaging and/or the transit bolts are

removed. Refer to 'Installation instruction'.

• Add more laundry in the drum. The load may be too small.

• The ProSense function is able to adjust the programme du-

ration according to the type and the laundry load size. Re-

fer to 'The ProSense load detection' in 'Daily Use' chapter.

• Increase the detergent quantity or use a different deter-

gent.

• Use special products to remove the stubborn stains before

you wash the laundry.

• Make sure that you set the correct temperature.

• Decrease the laundry load.

• Reduce the quantity of detergent.

• Make sure that the flap is in the correct position (UP for

powder detergent - DOWN for liquid detergent).

• Make sure you have used the detergent dispenser accord-

ing the indications given in this user manual.

ENGLISH