Fujitsu BS2000 SE300 Manuel - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Fujitsu BS2000 SE300. Fujitsu BS2000 SE300 42 pages. Server unit x86
Également pour Fujitsu BS2000 SE300 : Manuel d'utilisation (22 pages)

Imprimer la page

Powering on further units

The powered-off Server Unit is powered on. As soon as the Power status for the Server Unit

is On and the monitor or Native BS2000 system have reached the status INIT_ONLY, you

can boot the BS2000.

Powering on additional Units (redundant MU, HNC)

For BS2000 operation on an SU /390m the following units should also be powered on:

In the case of MU redundancy the second MU should also be powered on. Only in this

●

way will it remain possible to continue operating the SVP of the SU /390 if the first MU

crashes. The SE Manager on the second MU will also remain available.

To enable the BS2000 systems to communicate over the IP network and ensure access

●

to Net-Storage is possible, the HNC must be powered on. Redundant existing HNCs

should also be powered on.

After a Server Unit has been powered on, depending on the operating mode set,

the Native BS2000 system or the VMs are started up if an automatic startup (auto

IPL) has been configured for this purpose.

Powering on, starting up BS2000, powering off

U41857-J-Z125-2-76