Brother DCP120C - Flatbed Multifunction Photo Capture Center Manuel d'installation rapide - Page 25

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother DCP120C - Flatbed Multifunction Photo Capture Center. Brother DCP120C - Flatbed Multifunction Photo Capture Center 33 pages. Quick setup guide - french
Également pour Brother DCP120C - Flatbed Multifunction Photo Capture Center : Manuel de démarrage rapide (33 pages), Manuel d'installation rapide (24 pages), Liste de référence des pièces (30 pages), (français) Guide D'installation Rapide (24 pages)

Imprimer la page
Brother DCP120C - Flatbed Multifunction Photo Capture Center Manuel d'installation rapide
Installing the Driver & Software

For Network Interface Users (DCP-315CN only)

®
For Mac OS
X 10.2.4 or greater
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on page 4-9.
1
Disconnect the machine from the power
socket.
2
Turn on your Macintosh
3
Put the supplied CD-ROM into your CD-ROM
drive.
4
Double-click the Start Here OSX icon to install
the printer and scanner drivers. If the language
screen appears, choose your language.
5
Click MFL-Pro Suite to install.
6
Follow the on-screen instructions, and restart
®
your Macintosh
.
7
Lift the scanner cover to its open position.
®
.
8
After the DeviceSelector window appears,
connect the network interface cable to your
®
Macintosh
and then to the machine.
Note
The DeviceSelector window will not appear if you
have connected a USB interface cable to the
machine before restarting your Macintosh
you are overwriting a previously installed version
of the Brother Software. If you encounter this
problem continue but skip 13 through 16. You
should choose your Brother machine from the
Model pop-up menu in the main screen of
ControlCenter2. For details, see Chapter 10 in the
Software User's Guide on the CD-ROM.
9
Connect the network cable to the LAN socket
marked with a
LAN socket above and to the left of the ink
cartridge slots, as shown below.
Macintosh
®
or if
symbol. You will find the
®
23