Fujitsu ETERNUS DX Disk Manuel de configuration - Page 28

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 32 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Également pour Fujitsu ETERNUS DX Disk : Manuel de l'utilisateur (35 pages), Manuel de l'utilisateur (42 pages), Manuel de configuration (28 pages), Manuel de configuration (44 pages), Manuel de configuration (28 pages), Manuel de configuration (29 pages), Manuel de configuration (25 pages), Manuel de configuration (35 pages), Manuel de configuration (31 pages), Manuel de configuration (43 pages), Manuel de configuration (21 pages), Manuel de configuration (24 pages)

Chapter 8

Setting Up XenServer

8.5

Setting the Multipaths

For XenServer 5.5 and 5.6

•

Define the settings at the end of the "/etc/multipath.conf" file ("/etc/multipathenabled.conf" for Xen-

Server 5.6GA and earlier) as shown below.

devices {

The parameter for "product" varies depending on the model to be used as detailed in the following ta-

ble:

ETERNUS DX/AF to be connected

ETERNUS DX60 S2/DX80 S2/DX90 S2

ETERNUS DX400 S2 series

ETERNUS DX8000 S2 series

Enable multipath.

(1)

Select [Server] from the XenCenter menu bar and open [Properties].

(2)

Select [Multipathing] in the [Properties] screen, check "Enable multipathing on this server", and

click the [OK] button.

Release the maintenance mode, and then reboot the server.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix

device {

vendor

product

prio_callout

path_grouping_policy

path_selector

failback

no_path_retry

path_checker

}

"FUJITSU"

"ETERNUS_DXL"

"/sbin/mpath_prio_alua %d"

group_by_prio

"round-robin 0"

immediate

tur

"product" value

ETERNUS_DXL

ETERNUS_DX400

ETERNUS_DX8000

XenServer

P3AM-4572-19ENZ0