AEG L7FE7261BI Manuel de l'utilisateur - Page 41

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG L7FE7261BI. AEG L7FE7261BI 49 pages.

14.1 Alarm Codes and Possible failures

The appliance does not start or it stops during operation. First try to find a solution to the

problem (refer to the tables).

WARNING!

Deactivate the appliance before carrying out any check.

With some problems, the display shows an alarm code and the Start/Pause button may

flash continuously:

If the appliance is overloaded, remove some items from the drum and/or

keep pressed the door while touching the Start/Pause button until the

indicator

Problem

The appliance does

not fill with water

properly.

The appliance does

not drain the water.

stops flashing (see the picture below).

Possible solution

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is not too low.

For this information, contact your local water authority.

• Make sure that the water tap is not clogged.

• Make sure that the inlet hose has no kinks, damages or bends.

• Make sure that the connection of the water inlet hose is cor-

rect.

• Make sure that the filter of the inlet hose and the filter of the

valve are not clogged. Refer to 'Care and cleaning'.

• Make sure that the sink spigot is not clogged.

• Make sure that the drain hose has no kinks or bends.

• Make sure that the drain filter is not clogged. Clean the filter,

if necessary. Refer to "Care and cleaning".

• Make sure that the connection of the drain hose is correct.

• Set the drain programme if you set a programme without

drain phase.

• Set the drain programme if you set an option which ends with

water in the tub.

ENGLISH